Ultimate Liquid Wax

$87.99 RRP

473 ml

|

G210516

Ultimate Liquid Wax

$87.99 RRP

|

473 ml

|

G210516

Raise the bar on shine with Meguiar’s most advanced wax ever! Increase your cars surface tension that will not only restore and improve paintwork to the highest level but will also achieve that showcar shine with the most amazingly deep, vibrant colour with an extraordinary wet-look.Meguiar’s most advanced hydrophobic wax has a ‘full-synthetic’ formula that delivers the longest lasting and highest quality protection with amplified reflectivity for that incredible depth and mirror-like shine. Combining the revolutionary ‘ThinFilm’ technology helps deliver the effortless application and removal, even in direct sunlight. Ultimate Liquid Wax also leaves no white residue on trims and plastic mouldings.

HOW TO USE: For hand application use a foam Hand Applicator Pad (included in pack). Apply to one section at a time,allowing 3-5 minutes before removing with a Meguiar’s Microfibre Polishing Cloth (included in pack). ALWAYS READ FULL DIRECTIONS PRINTED ON THE PRODUCT PRIOR TO USE

Also suitable for use with a DA POLISHER.

THIS GOES WITH THAT

YOU MAY ALSO LIKE

FAQ's

CAN I USE POLISH AND WAX PRODUCTS ON FACTORY MATTE FINISH PAINT?

Never apply any type of polish or wax product to a Matte Finish Paint surface as they will cause the finish to become glossy. You can remove finger prints, smears and very light marks using either Quik Detailer (A3316) or Ultimate Quik Detailer (G14422).

ARE THERE TIMES WHEN I SHOULDN’T WAX MY CAR?

Yes, if your car has new paint applied as a result of smash repair work or a respray. You should wait 8 weeks to allow for the paint to cure and harden before you apply a wax product to protect your paint.

CAN I POLISH AND WAX MY CAR IF IT HAS PAINT PROTECTION?

Polish and wax products shouldn’t be used on cars that have paint protection applied, and may void the manufacturers warranty terms and conditions if used.

HOW DO I BEST APPLY POLISH AND WAXES?

For best results apply polish & wax products with a foam Hand Applicator Pad (APPAD). Apply small amounts of product on the foam applicator pad and spread a thin, even coat over the paint surface.